English Spanish
Home


Industrial Hydraulics

Hidrolub AW Anti-wear
SO 32, 46, 68.

The HIDROLUB include the number of AW-quality lubricants formulated with mineral bases and antiwear additives for lubricating hydraulic systems. It is approved by various original equipment manufacturers.

Hidrolub AW Anti-wear
SO 32, 46, 68, 100, 150, 220

The HIDROLUB series it is recommended for the lubrication of bomb type pallet, pistons or gears, of hydraulics systems of mobile or stationary equipments.
The HIDROLUB series, can be used on regular hydraulics systems, inclusive those that operating with maximum pressing, higher than 1000 psi.

The HIDRUOLUB series also can be used in many industrial applications such as compressors or regular circulating systems when required a product of this viscosity grade and anti wear protection features.    


The HIDROLUB RC series, it is recommended for the lubrication of bombs type pallet, piston &/or gears of high pressure, hydraulics systems of mobile and stationary equipments and applications that involving yellow metals, servos, &/or tools of numeric controls (nc) or its components.
The HIDROLUB RC series, can be used on general hydraulics systems and where the formation of particles could be critic, even in those that operating with maximum pressing higher than 1000 psi.

The HIDROLUB series also can be used on many industrial applications such as compressors, gears and bearings, electric engines or circulating systems, when required a product this viscosity grade and the anti wear protect features.  




Industrial Transmissions

Luber Reducers
ISO 68, 100, 150, 220, 320, 460, 680

The LUBER REDUCERS line is recommended for:
Every industrial close gear system and where specified an AGMA lubricant of extreme pressing (gearboxes, Moto-reducers and industrial multipliers, chain transmissions, bearings and anti friction

Every gear system with application by mist (lubricants systems type bath, circulation, sprinkle and atomization).





Textile

Texlub
ISO 22, 32

It recommends for circle machines of high and low speed, knitting small and large diameter.  Owing to the efficient emulsifying and antistatic property, can use to fiber preparation androlls on looms.

It is very efficient in the manufacture of textile fibers, because not stain and is easy to wash


Texlub 20E

TEXLUB 20 E it is a lubricant of bitter, formulated with mineral basics stock oil of high purity with an additive package that allows be completely emulsifiable, it is 100% washable. Also allows operating as antistatic and meet with the requirements of the fabric manufacturers.




Tempering Metals

Luberquench 10

It is designed to provide a controlled cooling which is very important for the hardening steel. When the tempering begins, this product provide high speed of initial cooling causing a maximum harness, but once that happens the transformation critical temperature, the cooling fluid speed down to eliminate  the possibility of striving and distortion of metal.



Guides and Sliding

Luber Waytac
ISO 46, 68, 150, 220

The LUBER WAYTAC oil are first quality products, designed for the lubrication of the guides of every kind of machines. Those products can also use in other applications that require an adherent lubricant and non corrosive. Its formulated with mineral stock oils highly refined and an additive package that has sulfur and phosphorus in composition, which results that the product are multi-functional with high thermal stability and very good resistance against oxidation, besides having E.P. features (Extreme Pressure), good anti wear properties, anti foam and excellent adhesiveness




Turbines

Luber Turbo
ISO
32, 46, 68, 100, 150, 220

It recommends to be used on steam turbines systems with circulating bath system or by ring that  require lubricant type R&O (anti oxidation), it can be use in propulsion turbine, steam closed machines, speed reducers (low charge), bearings lubricated by rings.



Heat Transfer

Luber White Therm 603

The LUBER WHITE TERM 603 lubricant, it is good for processes such as melting, boiling, distillation, driest, jacketed, vulcanized, cooked and cured. These processes are present in industries such as the soap Industry, asphalt, plastic, resins, paints, rubber, paper, ceiling, fiberglass, textiles, food, adhesives, chemistry, varnishes, waxes, petroleum, pharmaceutical, woods and prints.


Luber Therm 603 ECO

The LUBER WHITE TERM 603 ECO lubricant, it is good for processes such as melting, boiling, distillation, driest, jacketed, vulcanized, cooked and cured. These processes are present in industries such as the soap Industry, asphalt, plastic, resins, paints, rubber, paper, ceiling, fiberglass, textiles, food, adhesives, chemistry, varnishes, waxes, petroleum, pharmaceutical, woods and prints.




Soluble Cutting Fluids

Luber Soluble

It is typically recommended for relationships oil/water of 1:10 in drilling operations, drilling, boring, derision, shaped, brushing, milling, cutting and turning in a wide range of carbon steel and alloyed, with high soft measures, specially when use tools with carbide tip.




Direct Cutting Fluids

Luber Cut 15 A

SIt can be used in a wide variety of applications where the requirements of machining ranging from moderate to severe and it recommends for carbon steel and iron cast in drilling operations, fresh, turning, internal and external threading, rhymed, drilling, brushing, forged, multiple broken and automatic spindle of easy machining.


Luber Cut B6 A

It can be used in a wide variety of applications where the requirements of machining ranging from low to medium severity and it recommends for carbon steel and iron cast in drilling operations, fresh, turning, internal and external threading, rhymed, drilling, brushing, forged, multiple broken and automatic spindle of easy machining.


Luber Cut NF

It can be used in a wide variety of applications where the requirements of machining ranging form low speed, light severity and low charge as riveting, inlaid and drilling of soft metals, and for machining of small parts of brass. Also it can be used in operation of high speed and low charge as form rectifying, lapping, forged for parts of brass, copper and its alloys. This product fro its versatility recommended use for non stain steel alloys in operations of high speed iron cast machining and low severity as turning, drilling, threaded and milling.




Technical White

Luber White
ISO 22, 68

The LUBER WHITE oils, are used as base for the elaboration of textile lubricants oils, such for direct use as emulsifying for natural fibers and synthetics, in the elaboration of lubricant oil for mechanisms of high accuracy, for technical use as plasticizer and in the chemical industry in general. Allows the function as antistatic and meet the machinery requirements.




Compressors

Luber Compressor
46, 68, 100, 150

The use of the LUBER COMPRESSOR series can result in cleaner compressors and have low deposits than the conventional mineral oils, given longer periods of operation. The excellent  thermal stability and the oxidation allows a longer life thanks to better control for the formation of sludge and deposits. It has an unbeatable protection against wear and corrosion, which improves the life and output of the equipment.




Power Controls Aned Transmissions and Driving Force

Luber Trans T04

The LUBER TRANS TO4, are lubricants oils type Premium for transmissions, control ends, driving force and hydraulics systems, formulated to meet the rigorous specifications required for the newest manufactures equipments as Caterpillar for his TO4, General Motors for his Allison C-4 and Komatsu Micro-Clutch, those who recommend use it in their transmissions, impulse train, Oil brakes (wet brakes) and hydraulics systems. These oils contemplate its applications in all systems where require Lubricant oil of high performance given maximum protection, even in high pressure systems.




Vacuum Pumps

Luber Vac Oil 80

Sheet

It is a lubricant with Premium quiality, recommended for the lubrication of vacuum pumps and formulated with mineral stock oils highly refined of low volatility and high chemical stability who has been added an additive package carefully selected which contains additives enable it to resist the oxidation, stain, corrosion and avoid the formation of sludge and deposits, also gives excellent anti foam quialities, which allows keep the original features of the lubricant during the time of service and prolongs the useful life.